Dahle CleanTec 41534 High Security Department Shredder

Available on GSA Contract Number GS-02F-0112P

In order to protect our National Security, military and government agencies require higher levels of security from their paper shredders. The DAHLE CleanTECŪ 41534 is a Security Level: P7 (old level 6) machine capable of reducing a single sheet of paper into over 15,500 tiny particles. This machine is designed for military, federal, state or local governments as well as Department of Defense contractors engaged in projects where National Security is an issue.

The DAHLE CleanTECŪ is the World's only shredder with a fine dust filtration system. This integrated system collects fine dust particles created around the cutting cylinders, and forces them into a specialized filter on the back of each machine. This DAHLE CleanTECŪ filter permanently traps up to 98% of the fine dust, and provides a cleaner, healthier work environment.

The Dahle CleanTec 41534 High Security Shredder is built with a 12" feed opening to accommodate both letter and legal size paper with ease. This cross-cut machine produces a very small 1mm x 4.7mm particle shred size to security level 6 standards. It offers a up to 12 sheet capacity.

The DAHLE CleanTECŪ 41534 shredder features the most advanced safety features in the industry. Equipped with the revolutionary Safe Technology Package, each shredder offers Verbal and Contact Emergency Shutdown. In the event of an emergency, simply say "Stop" or tap the top cover of the machine, and the shredder immediately stops. The 12" feed opening is reinforced with steel and only large enough to accept paper. As an added safeguard, this opening contains electronic sensors that will turn the shredder off, should your fingers get too close. An emergency shutoff switch is also located on the back of the machine as yet another level of personal safety.

The DAHLE CleanTECŪ 41534 operates using the intuitive SmartPower Energy Management System. This multi-stage system reduces power consumption after ten minutes of sitting idle (sleep mode), and completely powers down after 30 minutes of inactivity. Dahle SmartPower will appeal to those interested in conserving energy as well as reducing electrical costs.

Normal office functions will not be bothered by the use of your 41534 High Security Shredder. Each cutting cylinder is encased in an all-steel frame and sits on rubber shock mounts. This design reduces vibration throughout the cabinet and provides whisper quiet operation.

Just like any fine tuned machine, your shredder needs to be properly oiled to run at peak performance. This shredder is equipped with the Dahle EvenFlow Lubricator. This automatic oiler provides slow, continuous lubrication across the entire cutting mechanism and ensures peak performance.

Accessories - such as spare waste collection bags or lubricating oil - for this unit are available on our Shredder Supplies page or by clicking below.

Please click here for illustrated images of sample shred sizes.

Features

• 1mm x 4.7mm Cross Cut
• Security Level P7 (old level 6)
• 12" Feed Width
• Up to 12 Sheet Capacity
• SmartPower Energy Management Solution
• EvenFlow Lubricator automatic oiling system
• Fully Automatic Features: On/Off; Bag Full Auto Off; Continuous On; Auto Reverse
• dB level: 52

Recommended Supplies

• Shred Bags Plastic Waste Collection Bags (Part #706): 100 waste bags for $125
• Shredder Oil (Part #20740): 6 12 oz bottles of lubricating oil for $60.00
• Shredder Oil (Part #20741): 4 1 gallon bottles of lubricating oil for $175.00