Accessories for the ImageMASSter 4000 PRO Product Line

Home Hard Drive Erasers AccessoriesAccessories for the ImageMASSter 4000 PRO Product Line

Accessories for the ImageMASSter 4000 PRO Product Line


		SCSI Drive Expansion Box for Solo-4/IM 4000Pro/ WipePro The SCSI Drive Expansion box for SOLO-4/IM 4000Pro/WipePro will enable these units to handle SCSI drives. $1,400.00


		IDE 8 Channel Host and Drive Caddy Option The IDE 8 Channel Host and Drive Caddy Option expands the Rapid Image, IM 4000 PRO and IM WipePRO units versatility by allowing the support of IDE hard drives. $2,000.00


		IDE Support per Channel Option The IDE Option expands the Rapid Image and IM 4000 PRO units' versatility by allowing the support of IDE hard drives. $100.00


		2.5" Host Caddy and Drive Caddy The 2.5" Target Drive Bay Caddy for IM 4000 PRO and IM WipePRO provides 8 drive slots to support use of the standard "2.5-inch" S-ATA form factor drives, "2.5-inch x 15mm high" SAS form factor drives and Micro S-ATA drives using the optional Micro S-ATA Adapter. $2,000.00


		3.5" Host Caddy & Drive Caddy The 3.5-Inch Target Drive Bay Caddy for IM 4000 PRO, IM WipePRO and Rapid Image products provides 8 drive slots to support use of the standard "3.5-inch" S-ATA form factor drives. $2,000.00


		Open Drive Tray Option With SATA/SAS Cables The Open Drive Tray provides a flexible drive mounting solution for non-standard Form Factor drives. This accessory is available as an option on the ImageMASSter 4000 PRO and ImageMASSter WipePRO units. Includes set of 8 SATA/SAS cables. $599.00


		Protective Window for Screen The Protective Window is an optional hardware add on to protect the sensitive screen of your ImageMASSter 4000 PRO or Rapid Image HDD duplication and erasing unit. $95.00


		SATA/SAS Cable SATA/SAS replacement cable for the Solo-4, Rapid Image, IM 4000 PRO and IM WipePRO line of products. $30.00


		S-ATA Male to Male Converter Cable The S-ATA Male to Male Converter Cable is used in combination with the SATA-to-eSATA cable (CBDR-0509-000B) to support the use of eSATA drives with a standard SAS 29-pin connector as its native interface. $15.00


		SAS to IDE Adapter The SAS to IDE Adapter supports the use of IDE drives with products using the standard SAS 29-pin interface connector. Includes the IDE Data and Power Cable. $125.00


		eSATA Cable Kit Option The eSATA Cable Kit converts the unit's native SAS connectors to allow connecting eSATA drives. The Kit includes the SATA-to-eSATA cable (CBDR-0509-000B) and the SATA Male-to Male Converter Cable (ADPR-0017-000A). $30.00


		eSATA to SATA 0.5m Data Cable The eSATA to SATA 0.5m Data Cable adds support for duplicating eSATA drives. It supports the use of eSATA drives on Image MASSter and Rapid Image units designed with the standard SATA interface connector. $15.00


		Micro S-ATA 1.8" 3.3V Adapter The Micro S-ATA 1.8" 3.3V Adapter supports the use of Micro S-ATA 1.8" 3.3V hard drives with devices that provide 3.3V output. $25.00